- Parameters
- Details
Inorganic liquid detection Medical detection Animal residue detection Environmental detection Pesticide residue detection Food detection Matrix detection Engineering Technology detection Steel detection Metal Material detection Detection of polymer materials Physical detection Chemical detection Geological detection Imported reference materials
>Experimental cleaning Elemental Analysis Biochemical Analysis Liquid chromatography Gas Chromatography Titration analysis infrared spectrum Other organisms
>Burner class Vessel and tube funnel Bottles Measuring instrument class Complete set of instruments Quartz products Filter class Standard oral class Vacuum Vessel Voltage regulator Centrifuge Ultraviolet analyzer
>Plastic products Tetrafluoride products Rubber and plastic products Silica gel products Ceramic Products Metal Products Enamel Products Filter paper products Thermometer Density hydrometer Chromatography Accessories Safety Protection
>Detector Analyzer Spectrometer Chromatograph Mass Spectrometer Detector Instrument system Machinery and equipment Other equipment
>Mobile Mall
水浴温度分辨率: |
|
水浴控温范围: |
|
转篮摆动幅度: |
|
桨杆摆动幅度: |
|
水浴池体积: |
18L
|
转速范围: |
10-250 RPM
|
温度精度: |
±0.1℃
|
温度范围: |
室温+5-55℃
|
溶出杯: |
8杯位
|
仪器种类: |
在线型
|
价格区间: |
|
产地类别: |
进口仪器
|
708-DS 溶出仪
708-DS 溶出度仪 重现性好,易于认证,是溶出度测试标准化的理想平台。这种耐用的多功能仪器最大程度地减少了外部可变因素的影响,并且遵循 USP 性能验证测试 (PVT) 以及 ASTM 和 FDA 建议的增强机械认证 (MQ)。708-DS 可以配置为与转篮(1 法)、桨(2 法)、浆碟组件(5 法)和转筒(6 法)结合使用,适用于 100 mL 至 2 L 规格的溶出杯。
产品特点
● 灵活的取样选件:可从溶出杯平面接近所有溶出杯,方便通过防蒸发盖孔进行快速手动取样。也可以通过电动取样架和 850-DS 溶出取样工作站实现自动取样。
● 用可选的手执式温度探头准确测量并记录各溶出杯内的温度,也可以通过 AutoTemp 杯内温度监控系统自动进行。
● 用自动投药模块 (DDM) 自动投药,或通过防蒸发盖孔手动投药。使用 DDM 功能可以同时或按预先设定的间隔顺序投入样品。
● 使用可互换溶出度附件定制仪器。一个共同的上轴可以连接可互换的转篮和桨,并且可以避免转换前后高度的重新调整,显著节省了时间。
● 便于阅读的彩色触摸屏使方法的设置、储存和执行简单快捷。具有屏幕锁定安全功能的直观界面还提供了多种语言选择,包括英语、西班牙语、日语和简体中文。
● 自动悬升的防蒸发盖板提供了向溶出杯中添加介质、手动取样和测量物理参数的简单途径。 当使用准直杆或 DDM 模块时,防蒸发盖板可自动随仪器驱动装置升高或降低。
● 使用 708-DS TruAlign 溶出杯能确保对溶出杯进行精准定位。嵌入式塑料环箍可维持准确的中心定位,并确保溶出杯壁与溶出杯板垂直对齐。指示标签保证了溶出杯方向定位的可重现性。
● 圆角水浴槽可减少清洗时间,使清洁简便高效。
● 易于引液的加热器/循环器位于水浴槽的后部、溶出杯板的下方,节省了宝贵的实验台空间。它还装有隔振器,最大程度地减少了传导至仪器的振动。
● 与溶出度工作站软件集成后,可通过一台计算机实现多达四个系统的自动控制。