- Parameters
- Details
General Reagent High Purity Reagent Chromatography Applications Analytical standard Synthetic block Synthetic reagent Materials Chemistry Analytical reagent
>Inorganic liquid detection Medical detection Animal residue detection Environmental detection Pesticide residue detection Food detection Matrix detection Engineering Technology detection Steel detection Metal Material detection Detection of polymer materials Physical detection Chemical detection Geological detection Imported reference materials
>Experimental cleaning Elemental Analysis Biochemical Analysis Liquid chromatography Gas Chromatography Titration analysis infrared spectrum Other organisms
>Burner class Vessel and tube funnel Bottles Measuring instrument class Complete set of instruments Quartz products Filter class Standard oral class Vacuum Vessel Voltage regulator Centrifuge Ultraviolet analyzer
>Plastic products Tetrafluoride products Rubber and plastic products Silica gel products Ceramic Products Metal Products Enamel Products Filter paper products Thermometer Density hydrometer Chromatography Accessories Safety Protection
>Detector Analyzer Spectrometer Chromatograph Mass Spectrometer Detector Instrument system Machinery and equipment Other equipment
>Mobile Mall
流量稳定性: |
稳定
|
最低检出限(µg/m3): |
<1ug/m3(24小时)
|
采样流量: |
1m3/h
|
测量周期: |
连续监测
|
测量量程: |
0-10mg/m3或0-10000ug/m3
|
价格区间: |
25万-40万
|
测量方法: |
β射线法
|
测定参数: |
双参数PM2.5/ PM10
|
The Thermo ScientificTM Model 5028i连续颗粒物监测仪采用β射线衰减测量技术,并结合成熟的i系列平台而设计开发的全新颗粒物监测仪器。
主要特点
· 美国环保署认证的PM10(EQPM1102-150)和PM2.5(EQPM0609-183)联邦等效方法
· 双通道,真正连续,非步进式地同时测量PM10和PM2.5
· 内部可充电电池,以缩短仪器断电恢复后的稳定时间
· 加长的滤纸带可实现更长时间的无人值守操作
· 设计上更加易于操作和维护
与其他的连续颗粒物监测仪不同,Model 5028i连续颗粒物监测仪配有两个独立的采样通道,可配备不同的采样头和切割器,实现PM10和PM2.5的同时采样。PM10和PM2.5被分别采集到两卷不同的滤纸带上,并由仪器内部两套相互独立的监测系统来同时测量。颗粒物质量测量和采样体积的测量结果被用于颗粒物质量浓度的计算。通过多种用户可选择的数据存储记录选项,颗粒物的质量浓度可以以实际工况浓度或标准状况浓度的形式输出。
Model 5028i可根据用户设定的条件来自动更新采集样品的滤纸带,用户可设定的条件参数包括采样的样品总量限值,采样时间间隔,或与流量相关的压力变量。
与步进式的测量方法相比,Model 5028i的滤纸带移动是单方向的,能有效减少颗粒物的损失。另外,加长的滤纸带可降低更换频率,支持更长时间的无人职守操作。
为了更准确地应对水分与挥发性组分损失造成的测量偏差,Model 5028i配备了动态加热系统,用户通过设置,能有效地控制样品的温度或湿度。
Specifications 规格 |
|
Source 放射源 |
碳-14, <3.7 MBq (<100 μCi) |
Measurement Range 测量范围 |
0~0.1, 1.0, 2.0, 3.0, 5.0, 10.0 mg/m3; 0~100, 1000, 2000, 3000, 5000, 10000 μg/m3 |
Minimum Detection Limit 最低检出限 |
< 4 μg/m3 (1小时)@2σ; < 1 μg/m3 (24小时)@2σ |
Resolution 分辨率 |
0.1 μg/m3 |
Precision 精度 |
± 3.0 μg/m3 < 80 μg/m3; 4-5 μg/m3 > 80 μg/m3 (24小时) |
RMS Precision RMS精度 |
PM2.5 < 5%, PM10 < 5% (24小时) |
Accuracy (for mass measurement) 准确度 (对于质量测量) |
± 5%, 使用NIST可溯源标准膜片 |
Air Flow Rate 采样流量 |
1 m3/h (16.67 L/min) |
Sample Flow Precision 采样流量精度 |
测量值的± 2% |
Sample Flow Accuracy 采样流量准确度 |
小于测量值的5% |
Mass Concentration 质量浓度 |
60~3,600秒和24小时 |
Data Output Rate 数据输出频率 |
1秒 |
Operating Temperature 工作温度 |
环境温度可能在-30~50℃之间变化, 5028i的工作温度需在4~50℃之间, 且须不受外界气候影响 可选户外选件, 保护其不受外界气候的影响 |
Non-condensing 非冷凝 |
仪器内部小于95% RH |
Output 输出 |
可选电压, RS232/RS485, TCP/IP, 10个继电器输出和断电指示 (标准). 0-20或4-20mA隔离电流输出 (选配) |
Input 输入 |
16位数字输入 (标准), 8路0~10 VDC模拟输入 (选配) |
Power Requirements 电源要求 |
110~120 VAC, 220~240 VAC, 50/60 Hz, 最大功率700 Watts |
Pump 泵 |
220 VAC 50/60 Hz, 2.0 A |
Physical Dimensions 外观尺寸 |
18.96” (48.2 cm)宽×22.23” (56.5 cm)深×23.43” (59.5 cm)高 |
Weight 重量 |
110 VAC: 77 lbs (35 kg); 220 VAC: 66 lbs (30 kg) |
Protocols 通讯协议 |
C-Link, MODBUS, Gesytec (Bayern-Hessen), ESM协议, 数据流和NTP协议 (Network Time Protocol), 通过以太网可从不同地方同时连接 |
Safety and Electrical Designations 安全与电路设计 |
设计达到要求CE: EN 61326:1997 + A1:1998 + A2:2001 + A3:2003, EN:61010-1; UL: 61010-1:2004; CSA: C22.2 No. 61010-1:2004; FCC: Part 15 Subpart B, Class B |
Approvals and Certifications 认证 |
美国环保署PM10联邦等效方法认证: EQPM1102-150 美国环保署PM2.5联邦等效方法认证: EQPM0609-183 |